Bribie Island – Bongaree & Whitepatch – 29 August 2012

Wednesday

The winds would be from the south – cool and choppy conditions but better, in my humble opinion, for fishing. High tide would be just after 7.00 am at Bribie so I decided to head up there to fish on Wednesday morning.

I started in front of the Seaside Museum again, just after first light, at about 5.50 am. I tried the sand spit at the mouth of the big Buckley’s Hole lagoon drain. I nearly stepped on the biggest ray I have ever encountered wading out. I cast around with a couple of different soft plastics but I could not really land them close enough to the edge of the drop off, where the fish tend to congregate.

At about 6.45 am I walked back up to the clump of Mangroves, next to the small road bridge over the museum drain. It was now almost high tide and I did not need to wade out. I cast a GULP 4 “ Minnow on a 1/8th 1/0 jighead, about 12 metres out. Two hops and the lure was snaffled. I pulled it in and up the sloping rockwall – a 52cm Flathead. I cast around the area a little more and then decided to wade out a bit. I little further out from the point of the first capture I clearly saw a nice Flathead rocket upwards from the bottom to grab the soft plastic. It turned and headed for the ledge. I pulled hard and thought I had set the hook. It made a few runs and I started to tow it back to shore. Then suddenly the line went slack and it was gone. It had sawn through the 10lb leader and taken the lure and jighead with it.

I decided to thaw out with a hot cup of coffee. I then drove up to White Patch and decided to spend the run out tide fishing along the drop off in this area. I started at the northern end of the beach. This spot always produces plenty of Pike and today was no exception. I arrived at about 8.30 am and decided to keep fishing with the GULP 4” minnow in the Smelt colour. I felt plenty of hits but could not hook up so I changed the plastic to the GULP 4” Swimmow in the Peppered Prawn Colour and shortened it slightly at the head end. This did the trick and I soon caught a few Pike. I pulled one from the water with some lacerations on its side and the next one was leaping all over the place, as I wound it in.

After a brief pause for a few casts, I hooked up again, but not for long. There was a big swirl under the Pike and then the line went slack. I reeled in the twitching head of the Pike. Something had bitten through the middle of it. I could see the tail floating out in the water and whatever it was came back, with another splash to swallow that, as well.

Perhaps not surprisingly things went quiet. I waded south, casting as I went. About 40 metres further on I hooked up with a fish, but after a short fight it spat the lure out. I carried on for another hour and I had almost reached the southern end of Whitepatch when I hooked up again, in the shallows. Once again after a few runs, I got a look at a good Flathead before it spat the lure out – not my day!

I decided to wade back to the car. The tide was in the last of its run out. I swapped back to the GULP Smelt Minnow soft plastic and just kept flicking it out, over the ledge. Suddenly, close to the edge I got a hit and the fish took off. It had a bit of weight to it, so I set the hook and hung on. I had the drag quite tight and did not fiddle. It kept trying to swim under the ledge like a cod, but then I saw a long tail and realized it was another good Flathead. Eventually I lifted it over the ledge and pulled it clear of the water – a serious Flathead at about 65cm. After all the mornings losses I was tempted, but decided it was a bit too big for a keeper and so she swam away after a picture.

Advertisements

3 responses to “Bribie Island – Bongaree & Whitepatch – 29 August 2012

  1. I am once more amazed, good work Landangler, I’m fishing at Bongaree once a week at least, I managed to hook a few big breams (40+cm, following some of the tips you gave on this blog) but I only get little flatheads on dirty old prawns from the servo! I’ve tried soft plastics, same as yours mostly but I never managed to get even a bite! I know it has been requested before but is there any chance that you’d post a tutorial on soft plastic ? the fish are obviously there, I just need to know how to cast those Jerk-heads and minnoys! thank you very much and again, well done!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s