Tag Archives: Fishing for Tailor on Bribie Island

Bribie Island – Wind, weed & a few Tailor – 31 July 2011

Posted on by
Reply

Unfortunately it was a disappointing morning’s fishing at Bribie Island. The fish are there but the wind and weed are conspiring to make them very hard to catch. The wind was forecast at 10 to 15 knots from the south-east, but when I arrived at the island jetty around 5.15 am, it was blowing at least 20 knots from the south-west. A few brave souls had been fishing off the jetty since about 1.00 am, but all they had to show for their efforts was a thick carpet of ‘snot’ weed. The wind was building so I decided to go back to fish under the bridge – where conditions would be a little calmer.

Windy and weedy - Bribie Island


The tide had just turned and was beginning to run in. This added to the weed problem. Almost every cast, the jighead and plastic ended up covered in weed. After a couple of nudges and touches, I caught the first fish of the day, in close to the bridge pylons. It was a small Tailor around 20 cm long. I was fishing with a GULP 4” Minnow soft plastic in the Pearl Watermelon colour, on a 1/6th 1 jighead. I had a few more bites here and even found a couple of Pike.

Bribie Bridge - typical size Choppa


As the sky began to light up, I moved back down to the mouth of the tidal lagoon near Buckley’s Hole. By now, I could only just cast over the edge of the big drop off, as the tide was coming in, fast. It was pretty choppy and the swell was building. Every other cast was still covered in weed, but eventually I felt a decent hit and some good head shakes and I had another Tailor. This one was about 35cm long and it had grabbed a GULP 5” Jerkshad in the Pumpkinseed colour. I released it and carried on wading south, along the shoreline. The wind was still blowing hard and the tide was pushing me further and further away from where I wanted to fish, so at about 7.30 am – I gave up. I have had enough of the wind and weed!

Bribie - Buckley's Hole - A 35cm Tailor

Bribie Island – Buckley’s Hole – Tailor, Flathead, Bream – 24 July 2011

Posted on by
1

Unfortunately paid employment has limited my fishing opportunities of late. The weather has also made things tricky with some windy mornings. Sunday was not ideal but I had to get my fix. I arrived at Bribie Island about 5.45 am and conditions were better than I expected. The tide was running out and would be low at around 9.00 am. The wind was from the south at less than 10 knots, but it was building.

Bribie Island Bridge - just before dawn


I started under the bridge on the island side. After a few casts I could see there was a lot less of the clinging ‘snot’ weed floating around. There was no surface action under the bridge lights. I decided to cast a soft plastic around just to the north of the bridge. After five or six casts with a GULP 4″ Minnow in the Pearl Watermelon colour, I felt a couple of bites. Next cast and the rod tip went mad. It was a Tailor just under 30cm. I caught a few more around the same size and then decided to move down to the mouth of the tidal lagoon, in front of Buckley’s Hole.

A 30cm Tailor - under the Bribie Bridge

I waded out just to the south of the new Bribie Island Seaside Museum. Looks very flash – but I would have preferred to see my tax dollar spent on something a little more essential! Like more gutting tables, hot showers and massages for tired fisherman, etc.

There is a small drain here, just to the south of the main island jetty, and on a run-out tide there are often fish around. After a few casts I had a Tailor – about the same size as the previous ones. I had switched to a GULP 5″ Jerkshad in the Lime Tiger colour. I let it go and carried on casting over the coffee rock drop off, that forms the edge of the Pumicestone Passage. I have not caught a Pike for a few weeks – I can only assume the marauding Tailor have either eaten them or scared them off.

Flathead love the Lime Tiger colour

A few casts later a fish grabbed the plastic, just on the top of the ledge. It was slower and heavier than the Tailor, as I dragged it back to the sand I could see it was a Flathead. It was around 45cm – things were looking up.

I started to head south, casting out of over the ledge and gradually skipping my soft plastic in close to the edge. There were small ‘hardy heads’ all along the drop off and every now and then they would scatter as something smashed into them from below. I switched to a 3″ Minnow in the Lime Tiger colour. After a couple of casts, a fish grabbed it and tried to hide down under the ledge. I gave it a bit of line then tightened the drag and pulled it up and over. It was a decent Bream around 30 cm long. A few more casts produced another fish, about the same size.

A 30cm Bribie Island Bream


I carried on moving up and down the ledge for another hour. A couple of times I was bitten off by what I assume were Tailor, but I did not land any more fish. I was fishing with 10lb leader which is no match for their teeth, but necessary to tempt the Bream. Overall, it had been a better session than last week.

Bribie Island – Buckleys Hole – Tailor, Bream, Flathead – 10 July 2011

Posted on by
Reply

Sunday

Unfortunately the requirement to feed my family (they want to eat something other than fish) has resulted in a pause in my fishing reports. This morning I had an opportunity to get back out there and even though the wind was up (south-westerly at about 15 knots) and it was only 5 Celsius , I drove up to Bribie Island in search of fish.

I had a couple of casts under the bridge, on the island side, just before dawn with a GULP 2” Shrimp soft plastic, but got no touches. As the sun started to light up the sky, I headed down to the mouth of the tidal lagoon in front of Buckley’s Hole. I waded out towards the drop off at about 6.30am. I carried on fishing with the GULP 2” Shrimp in the Pepper Prawn colour, mounted on a 1/6th 1 hook jighead. I was using 10lb Fluorocarbon leader tied on to 10lb breaking strain braid.

30cm Bream

I could not find the Flathead but at about 7.00 am, just to the south of the mouth of the drain I caught a good Bream, around 30cm long. I few casts later I caught another, smaller Bream. The Pike seem to have disappeared from this area at the moment – not sure why.

20cm Bream

I waded further south. The wind was very cold but was beginning to drop off. The tide was running out strongly – high tide had been at about 4.30 am. I waded, casting all around, all the way down to the corner with Red Beach. After about an hour, all I had caught were a couple of 20 cm Flathead, so I turned around and walked back to the north.

30cm Flathead

I soon found myself back at the mouth of the Buckley’s Hole drain. The tide had slowed down and I had switched to a 3” Minnow soft plastic in the Pepper Prawn colour, rigged on a lighter, 1/8th 1 hook jighead. I felt a couple of hard hits and then I hooked a fish. The rapid rod tip movement showed it was a Tailor. I unhooked it and took a quick picture before releasing it. It was just under the legal size at about 28cm. Over the next hour I caught three more that where all around the same size. They took both natural and brightly coloured plastics. It seemed like a small school was moving up and down along the coffee rock ledge, which runs parallel with the shore at this point.

30cm Tailor

By 9.30 am I was too cold to carry on, so I packed up and drove back to Brisbane. I released all the fish today.